DeLi redux

I wrote about this six months ago (here). I took out the modem on the old machine I had installed Deli on, and put in an Ethernet card. Since a new version of Deli had come out I decided to try it out again from scratch.

The install went pretty much the same as the last time, but this time I tried to configure the local network during the delisetup part (after installation). The delisetup command (at the command prompt after logging in) goes to a text-based setup. (Note: if you try to go straight to a gui interface (by typing startx) without doing the setup, it gives a group of white terminals on an icewm interface; but closing the terminals closes the gui interface). The setup categories are:

  • Keyboard
  • Language
  • Setup LILO – the Linux Loader
  • Setup PPP – Needs data from your Internet Service Provider
  • Setup local Network
  • Printer Setup
  • Setup Tiny X Server
  • Setup Window Manager
  • Install additional software packages
  • Set up your Mail system (with masqmail)
  • Select servicesto run at boot

I went through the Setup for local Network. The first screen says you can always go back and make changes by typing netconfig (it says that, but it lies: typing netconfig gets an error message that there is no such command). Then it wants a hostname and domain name. There are instructions with screenshots at the wiki on the Deli site. After the hostname and domain name, you choose between using a static IP, DHCP, or loopback. I tried both static IP and DHCP, but somehow ultimately ended up with loopback. Choosing DHCP will take you through a probe for an Ethernet card. The message I got was “A networking card using com20020.o module has been detected.” Great, but it wouldn’t connect to the network.

I tried “ifconfig” instead of “netconfig” and it showed, despite the Network configuration done in delisetup:

Link encap:Local Loopback

inet addr:127.0.0.1 Mask: 255.0.0.0

UP LOOPBACK RUNNING MTU 16436 Metric:1

After looking at a bunch of config files, going through delisetup several times, and editing the /etc/rc.d/net file, I checked the ethernet card and put it in another slot. But the browser is still giving the error: “dns can’t find slashdot.org.” I think it’s stuck in loopback purgatory, and I don’t have the right incantations to get it out.

On the other hand, it is still a nice, fast distro, even on this old dinosaur, and not that difficult to install, as long as you’re not trying to connect to the Internet.

Advertisements

Tags:

One Response to “DeLi redux”

  1. fsw Says:

    Hi,
    have you try to put in /etc/resolv.conf your name server?
    I’ve DeLi 0.7.2 up and running on a 486DX2 with 20 Mo of RAM and Internet is working.
    In /etc/resolv.conf, it has to be written like this:

    nameserver dns.of.your.provider1
    nameserver dns.of.your.provider2

    where you replace by the IPs if you know them or by the IP of your router if you use one (192.168.0.1 or 192.168.1.1).

    Good luck!
    fsw (writing articles in the french magazin Linux Pratique)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: